Sectional garage doors open by lifting in horizontal panels that travel up tracks on the side walls and run flat along the ceiling. The door occupies no driveway space when open, allows the full width of the opening to be used for entry (unlike a canopy up-and-over), and sits flush with the front face of the building when closed. They cost more than up-and-over doors. Whether that premium is justified depends on your specific situation.
Why Sectional Doors Cost More
A sectional door has more components than an up-and-over: multiple hinged panels, side tracks that run the length of the garage, a torsion spring system, and (in most cases) an integrated automation motor. The installation takes longer and requires accurate track alignment and spring calibration. The door itself is typically thicker (40–45mm sandwich panels) and heavier than an equivalent up-and-over. None of these factors are manufacturing inefficiencies — they translate directly into better insulation, rigidity, and security.
"A sectional door with 40mm foam-filled panels will typically achieve a U-value of around 1.0–1.5 W/m²K, compared to 4.0–6.0 W/m²K for a standard single-skin up-and-over door. For an integral garage — one that is attached to and accessed from the house — this difference in thermal performance is genuinely significant."— Garage Door Association — Sectional Door Insulation
Security
A sectional door locks from inside when closed — the panels engage with the tracks in a way that makes the door very difficult to force open from outside. There is no external handle or lock cylinder to attack. The closed door sits against a seal on all four sides, which also eliminates the gap at the bottom that up-and-over doors typically have. For homeowners who access the house through the garage, this internal seal matters for both security and draught exclusion.
Headroom and Clearance Requirements
Sectional doors require side room (typically 90–120mm each side for the tracks) and headroom above the opening (typically 150–200mm for the horizontal track run). In a garage with a low ceiling, brick piers close to the opening, or a beam running across the space above, a sectional door may not fit without structural alteration. Measure carefully, or have your installer survey before ordering — a sectional door that cannot be installed because of clearance issues discovered on the day is an expensive problem.
"Always have a physical survey before ordering a sectional door — not just a quote based on the opening dimensions. Side room, headroom, and the condition and position of the lintel all affect whether the door can be fitted as standard or whether modified track configurations or structural work will be needed."— Which? — Sectional Garage Doors
Looking for a Garage Door Specialist?
Firquote connects you with qualified, insured garage door installers in your area — free quotes, no obligation.
Get Free Quotes →